What Is The Function Of High Efficiency Filter

The high-efficiency filter has very high filtration accuracy, which can remove more than 95% of the suspended solids in the water, and also remove the viruses, bacteria and colloids harmful to the human body. The filtering speed per hour is quite fast, which is two to three times higher than that of ordinary filters. From the perspective of the capacity of dirt, it is also about 4 times larger than ordinary ones. The backwashing water consumption is less than 1 ~ 2% of the periodic filtering water. The high-efficiency filter has small volume and small space area, which is much smaller than ordinary ones. In the process of using the high-efficiency filter, users can also adjust the accuracy, capacity and resistance according to the water quality in their own area, which meets the personalized needs and ensures a more ideal purification effect. The high efficiency filter has been used for a long time. It has been used for about 20 years, and there is no problem.

What to pay attention to when purchasing high efficiency filter:

Our common high-efficiency filters only know that they can purify air dust, but they don't know the composition. In fact, they are subdivided into specifications, models, filter materials, outer frames, sealants and separators. In addition, there are technical parameters, efficiency, resistance, wind speed, air volume and so on.

Sheet size:

1. Thickness: generally, the primary filter is * thin, tens of millimeters or even a few millimeters. The thickness span of medium efficiency filter is large, about 100 to 600 mm. The thickness of the high efficiency filter is about 100 to 300 mm. In fact, it depends on the requirements of the manufacturer and customers. According to the raw materials and processes of the filter, this is only one aspect.

2. Outer frame raw materials: aluminum frame, aluminum alloy frame, galvanized frame, plastic frame, plastic frame, wood frame.

3. Filter material raw materials: glass fiber, polyphenylene synthetic fiber, polyester synthetic fiber, synthetic fiber.

4. * high temperature: generally about 70 degrees.

5. Final resistance: General: primary 0-200, intermediate 200-400, high efficiency filter 400-600. You need to check the relevant reports in detail. When budgeting, you can use 100 for the primary level, 200 for the intermediate level and 400 for the advanced level.

6. Air volume. Generally 40080012002003000. Of course, different manufacturers and different types.

Some knowledge points of high efficiency filter maintenance

The resistance will affect the service time of the high-efficiency filter, so the fundamental way to prolong the service life of the high-efficiency filter is to block the dust in the pre filter. The resistance prevention work is done well, so that the service time of the high-efficiency filter at the end can reach more than 5 years. At the same time, the use of high-efficiency filter will also be affected by corrosion factors, so it is necessary to pay attention to corrosion factors in some places, especially in places with high requirements, and the maintenance work should be done well. Attention should also be paid to the replacement of daily filters to ensure that the time is well done. Replace them as soon as possible to ensure the service time of the equipment.