What Can Be Done To Reduce The Maintenance Cost Of High Efficiency Filters?
The high-efficiency filter is a key component of the clean room, so enterprises pay more attention to it. Under the premise of ensuring the effect, what can be done to reduce the maintenance cost of the high-efficiency filter?
Air filters are industrial consumables. Generally, the primary filter needs to be replaced every 3 months, the medium-efficiency filter is replaced about 6, and the high-efficiency filter is replaced about 1 year, so the cost of the product is relatively high. Therefore, in general, the primary filter should be replaced as often as possible, because the price of this primary filter is relatively cheap, and the frequent replacement is to prevent too much dust accumulation, which will affect the service life of the subsequent medium-efficiency filters and high-efficiency filters. The medium-efficiency filter should use a differential pressure gauge to monitor the pressure difference on both sides of the air inlet and outlet. It is very good to have an alarm device. When the final resistance is reached, it will alarm, reminding the medium-efficiency filter to be replaced. When replacing the medium-efficiency filter at the beginning, you can ask the manufacturer to change only the filter material inside. The manufacturer of the filter can provide such a service. And the cost is much lower than the price of a new filter. But some cannot be replaced, it depends on the structure
Try to use a better high-efficiency filter. The ultra-fine HV fiber filter material should be better. Good filter material can effectively improve the service life and increase the dust holding capacity. If the filter material is too poor, the air volume is slightly larger, and it is easy to be damaged. blow out. That can't be done. A good high-efficiency filter has a lifespan of 2 years. The average high-efficiency filter has a lifespan of only 1 year. If it is replaced with high efficiency, production will be stopped. The manpower and material resources are not cost-effective. Therefore, how to choose a high-efficiency filter is a more important part.
